High performance water-proofer designed to revitalize insulation and breathability for all horse blankets and pet beds. Easy to use in a washing machine, non flammable and PFAS-free.

For waterproofing horse blankets.

• Easy to use wash-in waterproofing for all waterproof horse blankets
• Adds water repellency and revives breathability
• Enhances the performance of horse blankets, keeping your animal warmer and drier
• Recommended for Rambo® and all other animal blankets and jackets

How to use Nikwax Rug Proof™

Apply Nikwax Rug Proof™ in the washing machine…

For best results always clean rug first with Nikwax® Rug Wash™. No need to dry item(s) before waterproofing. It is vital that rugs are washed and rinsed thoroughly. Shake well before use. Follow care label instructions.

1. Remove all detergent build-up from the detergent dispenser.
2. Place clean rug in washing machine.
3. Use 17fl oz (500ml) for 1 rug. Treat 1 rug per load.
4. Run 30°C cotton cycle.

Air dry or tumble dry on a low setting if care label allows.

* For large items we recommend using a commercial laundry.

Use Nikwax Rug Proof™ by hand…

For best results always clean rug first with Nikwax® Rug Wash™. No need to dry item(s) before waterproofing. It is vital that rugs are washed and rinsed thoroughly. Shake well before use. Follow care label instructions.

1. Wear gloves. Use 17fl oz (500ml) for 1 rug, with 10.5 quarts (10 liters) of hand-hot water in vessel.
2. Agitate to mix, push down into vessel so that whole rug is immersed.
3. Add a further 16 quarts (15 liters) of warm water to cover rug and agitate.
4. Leave to soak for 2 hours, agitating occasionally.
5. Rinse in cold water until water runs clear.

Air dry or tumble dry on a low setting if care label allows.

Sponge on Nikwax Rug Proof™…

For best results always clean rug first with Nikwax® Rug Wash™. No need to dry item(s) before waterproofing. It is vital that rugs are washed and rinsed thoroughly. Shake well before use. Follow care label instructions.

1. Wear gloves. Spread clean rug on clean area and wet thoroughly with a hose.
2. Use 17fl oz (500 ml) for 1 rug, with 3 pints (1.5 liters) of hand-hot water.
3. Using a new sponge apply solution to rug, working into fabric and seams.
4. Use any surplus on back area of rug, leave for 5-10 minutes.
5. Rinse in cold water until water runs clear.

Air dry or tumble dry on a low setting if care label allows.

Nikwax’s trademarks are used with permission from Nikwax North America