Vetericyn Plus® Antimicrobial Hydrogel
Vetericyn Plus® Antimicrobial Hydrogel is designed to adhere to the site of application, creating a barrier for the wound. The gel sprays in a fine mist and gels on contact to cling to the site and immediately provide soothing relief and protection. The hydrogel provides the optimized moisture (not too wet or too dry) to maximize the wound healing environment while helping to keep dirt and debris out of the area.
Vetericyn Plus® Antimicrobial Hydrogel will not cause dermal irritation and is safe for use in sensitive areas. The gel formula makes it easy to clean those hard-to-reach areas on your pet and is an excellent choice for wound dressings. In-vitro testing shows microbial inhibition for a broad range of microorganisms such as MRSA, yeast, and staph.
Safe for all animal skin types at all life stages. No alcohol, steroids or antibiotics.
Directions for use: Shake well before use. Move excess hair from wound area. Clip if necessary. Adjust spray nozzle and saturate the affected area. If dressing is required, saturate dressing with Vetericyn Plus® Wound & Skin Care liquid or Antimicrobial Hydrogel at each dressing change. Repeat 3-4 times per day or as necessary. Faster healing is achieved when wounds are cleaned and maintained moist. No rinsing necessary. Safe for use around mouth, nose, ears, and eyes. For best results, first clean affected area with Vetericyn Plus® Wound & Skin Care liquid to ensure deep dermal cleansing and proper wound bed preparation.
Ingredients: Active: Hypochlorous Acid (0.010%)
Inactive: Electrolyzed Water, Sodium Chloride, Sodium Hypochlorite, Lithium Magnesium Sodium Silicate, Sodium Bicarbonate, Phosphates, Sodium Sulfate
Downloadable Resources:
SDS Sheet
16OZ HYDROGEL CLOGGING TROUBLESHOOTING: Please follow these steps to clear clogging on the 16oz Hydrogel trigger sprayer:
- Please try wiping or rinsing the nozzle with warm water. Build-up can from around the tip and cause blockage. If rinsing does not work, please try step 2.
- Carefully insert a needle into the hole at the tip of the sprayer where the product is released from. Try to remove any hardened material to free up the area so the hydrogel can flow freely. Please be careful using any sharp object as you can injure yourself or damage the product sprayer or bottle.
Note: After every use, the sprayer tip should be turned to the off position to help prevent build-up from occuring.
8OZ HYDROGEL PUMP PRIMING TROUBLESHOOTING: Please follow these steps to prime the 8oz Hydrogel pump sprayer:
- Depress the pump sprayer.
- Keeping the pump sprayer depressed, shake the bottle firmly 3-5 times in any direction.
- Release the sprayer.
- Pump the sprayer a few times and gel should begin to dispense.
Note: The steps above may need to be repeated more than once.
